Tips For Tree Removal Near Tall Structures

Tree removal in the best conditions possible can be a very dangerous endeavor. If you’re trying to remove a tree that is close to a tall structure, then you have a completely different set of potential hazards that you’re going to need to be on the watch for. Below, you can find just a few quick tips on successful tree removal near tall structures.

Check For Clearance

The very first thing that you should do prior to removing any tree is to check and make certain that you have adequate clearance from nearby buildings, power lines, and other hazards.

Make certain that regardless of which direction the tree falls that it will not fall into any buildings or other potential hazards. If the tree isn’t big enough to fall on any other structures and cause damages, then you can often remove it by simply sawing it as close to the ground as possible and then cleaning up the debris.

If the tree is small enough to be safely cut down without risking damage to anything else in the area, then you can decide on a day that will be best for tree removal.

Picking The Best Day For Tree Removal

Once safety of nearby structures and people has been established, the next step you need to take to successfully remove a tree near a tall structure is to check your local weather forecast.

You’re going to want to pick a day that is free of wind so that you can make certain you are able to determine which way the tree is going to fall.

When you’re about to remove a tree, remember that wind speeds are much higher the further from the ground you get. Often, feeling a light breeze on the ground means that wind speeds may be as high as 15 to 20 miles an hour at the top of the tree.

Small gusts of wind can result in the tree falling in a direction that you may have not intended and could result in potential harm if anyone is standing in its way.

Guiding The Fall Of Trees

If there are any potential hazards in the way of where tree may fall, then you’re going to want to guide the direction of the tree once it is cut down. “This can be done by attaching a cable or strap approximately two thirds of the way up the tree.” says Alan Barnes, an arborist who runs a tree service Indianapolis company that’s been serving it’s customers for over 15 years.

Once attached, you can then apply tension to the tree using a winch that is attached to a truck or a stationary winch that is designed for tree removal.

Just remember that the most important thing when removing trees is that you can determine exactly where the tree is going to fall prior to cutting it.

Remove Large Trees In Sections

If you have large trees that are close to tall structures, you’re going to want to bring them down in sections rather than trying to saw down the entire tree at once. Start at the top of the tree and remove branches so that they do not get in your way while you’re trying to work.

Once branches are removed, begin cutting the trunk in 10 to 12-foot sections and work your way down the tree. If you’re unfamiliar with how to do this, then you should consider consulting with a professional or a company prior to attempting this on your own.

Cutting down large trees that are close to tall structures can be very dangerous. In the worst-case scenario, people’s lives could be endangered or extensive damage could occur to your building and property if you do not cut sections from the tree properly.

On the flip side, many small trees can be successfully removed by individual so long as their roots are not under landscaping, sidewalks, or worst of all, the foundation of your building.

Final Thoughts

As you can see from the information above, tree removal can often be a very complicated and dangerous process. If you have any doubts whatsoever about your ability to successfully remove a tree that is standing close to a tall structure, you should take the time to consult with a professional tree removal service in your local area.

The risk of damage to life and property that can be caused by trees falling in the wrong direction is far too great to take any chances when it comes to tree removal.